Data Exchange Mappings

Each Data Exchange mapping is an XML file describing the structure of the JSON, XML or CSV format being mapped. Below you find the elements specific for each of the mapping types. The attributes that you can specify for each element are shared

JSON Mapping elements

The following are the elements allowed in a JSON mapping

  • the AimmsJSONMapping element, the mandatory root of a JSON mapping

  • the ObjectMapping element, a mapping element used to map a JSON object value (enclosed in curly brackets { and })

  • the ArrayMapping element, a mapping element used to map a JSON array value (enclosed in square brackets [ and ]). A JSON array mapping can only have a single child mapping, specifying the type of every element in the array.

  • the ValueMapping element, a mapping element used to map a integer, double or string value in a JSON file

XML Mapping elements

The following are the elements allowed in a XML mapping

  • the AimmsXMLMapping element, the mandatory root of a XML mapping

  • the ElementObjectMapping element, a mapping element used to map an XML element that holds child elements, but no value

  • the ElementValueMapping element, a mapping element used to map an XML element that holds a value, but no child elements

  • the AttributeMapping element, a mapping element used to map the value of an attribute of an XML element

CSV Mapping elements

The following are the elements allowed in a CSV mapping

  • the AimmsCSVMapping element, the mandatory root of a CSV mapping

  • the TableMapping element, a mapping element used to map a CSV table

  • the ColumnMapping element, a mapping element used to map the value of column in a CSV table

Mapping attributes

The attributes of the elements in a Data Exchange mapping are shared among the different types of mappings, although not all attributes are supported by every type of mapping element.

The available mapping attributes are:

  • name

  • binds-to

  • name-binds-to

  • name-regex

  • name-regex-prefix

  • iterative-binds-to

  • iterative-prefix

  • iterative-existing

  • iterative-reset

  • maps-to

  • write-filter

  • force-dense

  • embedded-mapping

  • base64-encoded

The name attribute

The name attribute specifies the name of the mapped element in a JSON, XML or CSV format. Not every element needs a name, for instance to root value in a JSON file, or the child mapping of a JSON array.

The binds-to attribute

The binds-to attribute, which can be added to the mapping of any value-holding element. The binds-to attribute will also provide an index binding for all sibling mapping elements of mapping element for which it is specified, or for the parent element in case the binds-to attribute is applied to an AttributeMapping element.

The name-binds-to attribute

The name-binds-to attribute provides a way of binding the name of an element in a JSON or XML file to an index in your AIMMS model. You would typically use this if a JSON or XML file holds elements with different names but with the same structure. Rather than creating a mapping for each of the elements you can create a mapping where the element names serves as an extra index in the binding of the multi-dimensional identifiers mapped to the values contained in each of the elements.

The name-regex attribute should be used in conjuction with a name-binds-to attribute, to specify a regular expression to restrict the element to which the name-binds-to attribute should be applied.

With the name-regex-prefix attribute you can specify a prefix that is used in the JSON, XML or CSV file, but which should not be included in the element names in the model. Note that the value of the name-regex-prefix attribute is automatically prepended to the regular expression specified in the name-regex attribute, and subsequently removed from the match if a match has been found.

The iterative-binds-to attribute

The iterative-binds-to attribute can be used if the given JSON or XML format does not hold an explicit value which can be bound to an index in your model. The iterative-binds-to attribute will generate elements using an increasing integer counter.

The iterative-prefix attribute can be used alongside the iterative-binds-to attribute. All elements created in the model will be prefixed with the prefix specified here. If you don’t specify a prefix, the element names will be just increasing integer values.

Assigning a value of 1 to the the iterative-existing attribute causes the iterative-binds-to attribute to not generate new elements, but instead to use existing elements of the set bound to the index specified in the iterative-binds-to attribute, starting at the element with ordinal 1.

The iterative-reset attribute can be specified at the parent element of a mapping element which holds a iterative-binds-to attribute. It will cause the integer counter of all direct child mappings to be reset to 1.

The maps-to attribute

You can assign the maps-to attribute to any value-holding mapping element. Its value should be a reference to an identifier in your model, including the indices bound at this location in the mapping tree. Note that this should match the dimension of the identifier exactly, and that the root domain of the identifier should match the root domains of the indices.

The write-filter attribute can be specified at any node in the mapping tree, and should be a reference to an identifier in the model including the bound indices at this location as for the maps-to attribute. For any tuple of bound indices for which the write-filter attribute does not hold a non-default value, the corresponding part of the generate JSON, XML or CSV file will be skipped.

The force-dense attribute should also contain a reference to an identifier plus bound indices as for the maps-to attribute. Thru this attribute you can force a specific density pattern by specifying a domain for which nodes should be generated, regardless of whether non-default data is present to fill such nodes, e.g. because the identifier specified in the maps-to attribute of the node itself, or any of its sub-nodes, holds no non-default data. Note that a density pattern enforced thru the force-dense attribute is still subject to a write filter specified in a write-filter attribute.

Enforcing a density pattern may be important when the bound indices are generated thru the iterative-binds-to attribute, and not explicitly represented thru data-holding node bound to a regular binds-to attribute. In such cases, not writing nodes that hold no non-default data, may lead to inconsistent numbering of generated elements when reading the generated JSON or XML files back in. When reading a JSON, XML or CSV file, the library will assign a value of 1 for the identifier specified in the force-dense attribute to any tuple encountered, such that the same file will be generated when writing back the file using the same mapping based on the data just read in.

Note that none of the maps-to, write-filter and force-dense attributes may contain an identifier slice, but must be bound to indices in the mapping for all dimensions of the given identifier. Thus, for instance, specifying a value of 1 to the force-dense attribute to enforce full density is not allowed. Instead you should create a full-dimensional parameter holding 1 for every tuple in its domain and assign that to the force-dense attribute.

The embedded-mapping attribute

Through the embedded-mapping attribute, you can indicate that a value-holding element in the given JSON or XML file should hold a string that can be read or written using the mapping specified in this attribute. Note that the mapping element to which this attribute is attached may not have bound indices.

Assigning a value of 1 to the base64-encoded attribute indicates whether embedded mapped string is or should be base64 encoded.

How does the mapping work for reading and writing?

In this section we will explain how the Data Exchange library uses the mapping to read or write a given format.

During read

When reading a JSON, XML or CSV file using a specified mapping, the Data Exchange library will iterate over the entire tree.

If reading a particular node in the data file, it will first try to bind any indices specified

  • at the node itself thru the name-binds-to or iterative-binds-to attributes, or

  • at direct child nodes thru the binds-to attribute,

and maintain a stack bound indices. Subsequently it will examine all other child nodes. If such a node is a structural or iterative node, it will recursively try to read the data associated with the child node. If the examined node is a value-holding node mapped to an multi-dimensional identifier, the value will be assigned to that identifier. Finally, if the node itself is a value-holding node mapped onto an identifier, it will also assign this value.

During write

When generating a JSON, XML or CSV file for a given mapping, at any given node, the Data Exchange library will examine all multi-dimensional identifiers associated with the node or any of its sub-nodes thru either the maps-to, write-filter or force-dense attributes, and will try to find the lowest subtuple associated with all these identifiers, for all indices bound at this level while fixing the indices already found at a previous level. If such a subtuple can found, bind the new indices at this level, write any mappped value-holding nodes at this level, and iterate over any structural or iterative nodes recursively. If such a node does not exist, there is nothing to generate for this node, and the Data Exchange library will track back to the previous node, and try to progress there.

The message here is that an JSON, XML or CSV tree is generated solely on the basis of multi-dimensional identifiers in the mapping, never on the basis of any of the binds-to attributes. Such nodes will be generated based on bound indices by iterating over multi-dimensional data.

Thus, for instance, to generate a JSON array containing only all element names of a set in your model, you must combine a binds-to attribute, together with a force-dense attribute consisting an identifier over the index you want to generate the elements for, holding a value of 1 for every element you want to be contained in the array.